The TCE 8501 Mass Flow Transmitter from TRICOR incorporates patented digital signal processing (DSP) that allow for continuous 2-phase measurement, partially empty tube conditions, start-from-empty batching, online flow sensor verification, and online pressure compensation.
Contact output
Programmable control inputs
Interfaces available: HART® Modbus
LCD Display
Hazardous area approvals: cCSAus , IECEx , ATEX
Other approvals: CE
| GENERAL | |
| Display | LCD |
| Programming | Via 4 softkeys on front panel (cover must be removed first) |
| AC Supply | 102-264 VAC; 120/240 VAC nominal; 50/60Hz+/-5% |
| Power Consumption | 18VA max |
| DC Supply | 10-36 VDC; 24 VDC |
| Power Consumption | 15W max |
| Interface | RS 485 (MODBUS-RTU); Option HART |
| EMC | According to EN 61326-1 and IEC 61000-4-2 through 61000-4-6 |
| Housing Material | Cast aluminum alloy w/ polyester paint finish; optional epoxy power finish |
| Housing Rating | IP66/IP67, NEMA 4X |
| Electrical Safety | ATEX; CSA/CSAus; IECEx |
| Temperature | Ambient: -40C to +60C (-40F to +140F)Storage and Transport: -40C to 85C (-40F to +185F) |
| 3 ANALOG OUTPUT (externally powered) | |
| Current Output | 4-20 mA; 22mA max, 3.9mA min |
| Load | 0-680 Ω; 24 VDC +/-10% |
| 2 PULSE OUTPUT | |
| Supply | 24 VDC +/-10%; 80 mA max |
| Frequency Range | 0 to 10KHz |
| Duty Cycle | 50% Nominal |
| CONTACT OUTPUT | |
| Type | Form A Relay; isolated |
| Supply | 24 VDC +/- 10% |
| Current Rating | 100mA max |
| CONTACT INPUT | |
| Type | Requires current linking device such as a contact closure or transistor switch between terminal block connections provided |
| Supply | 24 VDC +/- 10% |
| Current Rating | 15mA max |
TRICOR® Coriolis Technology Ltd.
When you combine decades of experience with truly unique talents, great things can happen. TRICOR engineers have been intimately involved with the development and evolution of Coriolis flow instrumentation since the beginning. In fact, many of the critical patents for Coriolis technology bear our engineers’ names. The TRICOR Coriolis range of globally-certified flow measurement products are designed and engineered in Germany with support teams in the United States and Switzerland. Our state-of-the-art manufacturing facility in Karlsfeld, Germany is equipped with advanced calibration and test equipment that guarantees world-class performance and the highest-accuracy, delivering flow measurement solutions for the most demanding applications.