The Honeywell Gas Controller Manning GM-JR is a unique, practical gas monitor readout/alarm device offers a variety of configuration options for industrial refrigeration customers with their own computer control system, OEMs who want to incorporate gas sensing in their design and existing Honeywell Analytics customers who want remote indication other than at their main readout. It has an easily adjusted setpoint and relay output in either configuration, plus 4/20mA output in the “feed-through” design. With its own plug-in power supply, the GM-JR sensor combination provides an economical answer for local concentration level information and controller capability.
The Honeywell Gas Controller Manning GM-JR standard configuration is a single, rugged, miniaturized board mounted inside the door of the enclosure, and a separate terminal board for the sensor and/or power cable connections. The 20-segment LED bar graph has a calibrated scale that is specified when ordered. Alarm trip adjustments are made easily at 5% increments. On power up or after momentary power loss, a one-minute power-up delay period allows the sensor to stabilize.
The controller unit continuously monitors the incoming 4/20 mA signal from the sensor. If the signal drops below 1.4 mA, the fault LED will illuminate and the alarm relay will trip. The alarm relay is always energized in its normal state, providing additional safety.
The GM-JR can be housed in its own 4″ x 6″ heavy-duty steel enclosure and operate as an “end of line” stand-alone readout/alarm unit or feed the sensor’s 4/20 mA signal directly through to a PLC. It also can be mounted in the door of any sensor enclosure to incorporate both sensor and readout in the same 4″ x 6″ or 6″ x 8″ housing. Use #18/3 shielded cable (Belden #8770 or equal) for runs up to 1500′ with most sensors.
Additional Features and Benefits:
• 20-segment calibrated bar graph
• Power-up delay
• Fail-safe design
• Easy trip setting
• Relay output is time delayed
• Downscale alarm configuration available for oxygen
• Rugged NEMA 1, gasketed steel enclosure
• Continuous fault monitoring
• Feed-through configuration allows remote readout capability while being powered from instrument cable (no remote power supply needed)
For nearly 50 years, Honeywell Analytics has been protecting people who put their lives on the line every day. It takes a special level of drive and dedication to work in hostile environments, and we believe your workers deserve the same kind of commitment from us when it comes to securing their health and safety. Right from the start, our founders were determined to find better ways to design, build and manufacture reliable gas detection solutions. Through advanced technology and pure industry know-how, Honeywell Analytics continues to improve and evolve our products. Today, we’re proud to partner with customers worldwide who share our vision of vigilance and rely on us to help them protect what matters most. From custom-designed solutions to unmatched training and support, Honeywell Analytics is simply the smartest choice when you demand the best in safety.