The Remote Switch option allows for a standard RSD System to be configured for use as a stand alone system without a Gateway. Using a simple table based configuration the system can be setup to switch the relay outputs when one (or more) remote nodes reaches a limit. A typical application is to shut off a well when one or more remote tanks become full.
- Stand alone system. Â No PLC or Gateway required
- Simple configuration interface
- Accepts data from all SignalFire remote nodes
- Two relay outputs
- Fail Safe capability
- Range up to 4 miles
- Small form factor DIN mount relay enclosure
- Status LED’s
Operating Temp: -40C to 70C
Power: 6-36 VDC, (battery power optional)
Relay Outputs: 2A, 30V, SPDT
Digital Inputs: Dry contact or 30 volts max (push-pull)
Radio Power: 500 mW
Antenna Type: Omnidirectional
Antenna Gain: 5dB
Receive Sensitivity: -105 dBm
Frequency: 902-928 MHz license-free ISM band, FHSS, FCC part 15 compliant
Range: 3+ miles (line of sight)
Internal Diagnostics: Supply voltage, signal strength, error conditions
Safety Rating: Non-insendive, Class 1 Division 2 groups C & D
Signal-Fire
The SignalFire system is a robust, short-range mesh network designed to give asset managers access to valuable process data. Easy to install and sensor agnostic, the wireless telemetry system can interface with many sensor types such as flow, level, pressure, and temperature, in controlling devices such as pumps, valves, heaters, fans, and lighting. Designed for challenging industrial environments, the SignalFire Remote Sensing System has been deployed in oil and gas fields, irrigation systems, water treatment plants, as well as a variety of other remote applications.
Modbus Stick